|
IP Address: Fixed: You can use enviroment variable name, eg. %MYIP% Read message from file PPP.LOG (eg. with EtherPPP) Use only WATTCP configuration file (eg. with Klos PPP) Try to do BOOTP (works with SLIPPER, CSLIPPER, DOSPPPD) |
Name of WatTcp configuration file: TCP/IP settings (optional)
| ||||||||||
|
Packet driver command: (eg: @cslipper com3 baud=19200 vec=60 irq=4) Packet driver unload command: (try @termin.com 0x60>NUL) Automatic dialer command: (eg: @mydialer.bat>PPP.LOG) MINITERM.EXE (setup screen follows) Terminal window for manual dialing: (eg. @comtool.com 3) MINITERM.EXE (setup screen follows) Note: These commands MUST begin with @ character. URL to display as "dialing page": (try file:dialinit.htm) The file: protocol must be specified in URL. The arachne:dialer, arachne:hangup and arachne:exit URL's can be included as links in this page. | |||||||||||
| MINITERM and DOSPPPD settings |
Basic communication setup:
Advanced communication setup: special base address: (0x???) use default base address for selected COM port (1...0x3f8, 2...0x2f8, 3...0x3e8, 4...0x2e8) Note: When using COM4, you have to enter base address manualy! Data transfer mode: (databits/parity/stopbits) Modem init string: (try ATZ,AT&F,AT&F0...) Dialing method: Tone dial (ATDT) Tone dial, no dialtone (ATX3DT) Pulse dial (ATDP) Bohmen und Mahren Telekom 1944-1998 (ATX3DP) |
Phone number: Terminal window: Show terminal window Login script: Try following dialogue
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||